面试题与答案

AC (Alternating Current) changes direction periodically, while DC (Direct Current) flows in one direction consistently.

Example:

Household electrical outlets provide AC, while batteries provide DC.

A transformer is used to change the voltage of an alternating current, either increasing (step-up) or decreasing (step-down) the voltage.

Example:

Power distribution often involves step-up and step-down transformers.

DC motors convert electrical energy into mechanical energy through the interaction of magnetic fields and current-carrying conductors.

Example:

In a simple DC motor, a coil of wire interacts with a magnetic field, causing it to rotate.

Insulation prevents the flow of electric current, while isolation physically separates electrical components or systems to avoid unintended interactions.

Example:

Insulation can be in the form of non-conductive materials, while isolation may involve physical barriers.

The star-delta connection is used to reduce the starting current of induction motors in three-phase systems, improving efficiency.

Example:

During startup, the motor is connected in a star configuration, and then switched to delta for normal operation.

Both are protective devices, but a fuse is a one-time-use component that melts when current exceeds a certain limit, while a circuit breaker can be reset and reused.

Example:

Fuses are common in older homes, while circuit breakers are more modern.

A semiconductor is a material with conductivity between that of a conductor and an insulator. It is widely used in electronic devices, such as transistors and diodes.

Example:

Silicon is a commonly used semiconductor material.

The time constant is the time required for the voltage or current in an RC circuit to reach approximately 63.2% of its final value during charging or discharging.

Example:

It is calculated as the product of resistance and capacitance (τ = RC).

Hysteresis is the lagging of the magnetic induction in a material behind the changing magnetic field, causing energy loss and heat generation.

Example:

Soft magnetic materials exhibit low hysteresis for efficient transformer cores.

A Schottky diode is a type of semiconductor diode with a low forward voltage drop and fast switching times, making it suitable for high-frequency applications.

Example:

Used in rectifiers and voltage clamping circuits.

Power factor correction is employed to improve the power factor of a system, reducing reactive power and improving efficiency.

Example:

Capacitors are often used for power factor correction.

A lightning arrester protects electrical equipment from damage caused by lightning strikes by providing a low-resistance path for the surge current to the ground.

Example:

Commonly installed on power lines and substations.

A relay is an electrically operated switch that uses an electromagnet to control the opening or closing of its contacts, allowing it to control high-power circuits with a low-power signal.

Example:

Used in control circuits, automation, and protection systems.

A capacitor stores electrical energy in an electric field and releases it when needed, smoothing voltage fluctuations and filtering signals.

Example:

Commonly used in power supply circuits and coupling applications.

Load shedding is the intentional reduction of electric power to certain areas or consumers during peak demand periods to prevent widespread power outages.

Example:

Utilities may implement load shedding to balance supply and demand.