Interview Questions and Answers
Freshers / Beginner level questions & answers
Ques 1. What are the two types of transmission technology available?
(i) Broadcast and (ii) point-to-point
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 2. What is subnet?
A generic term for section of a large networks usually separated by a bridge or router.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 3. What are the possible ways of data exchange?
(i) Simplex (ii) Half-duplex (iii) Full-duplex.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 4. What is SAP?
Series of interface points that allow other computers to communicate with the other layers of network protocol stack.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 5. What do you meant by "triple X" in Networks?
The function of PAD (Packet Assembler Disassembler) is described in a document known as X.3. The standard protocol has been defined between the terminal and the PAD, called X.28; another standard protocol exists between hte PAD and the network, called X.29. Together, these three recommendations are often called "triple X"
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 6. What is frame relay, in which layer it comes?
Frame relay is a packet switching technology. It will operate in the data link layer.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 7. What is terminal emulation, in which layer it comes?
Telnet is also called as terminal emulation. It belongs to application layer.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 8. What is Beaconing?
The process that allows a network to self-repair networks problems. The stations on the network notify the other stations on the ring when they are not receiving the transmissions. Beaconing is used in Token ring and FDDI networks.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 9. What is redirector?
Redirector is software that intercepts file or prints I/O requests and translates them into network requests. This comes under presentation layer.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 10. What is NETBIOS and NETBEUI?
NETBIOS is a programming interface that allows I/O requests to be sent to and
received from a remote computer and it hides the networking hardware from applications.
NETBEUI is NetBIOS extended user interface. A transport protocol designed by microsoft and IBM for the use on small subnets.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 11. What is RAID?
A method for providing fault tolerance by using multiple hard disk drives.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 12. What is passive topology?
When the computers on the network simply listen and receive the signal, they are referred to as passive because they dont amplify the signal in any way. Example for passive topology - linear bus.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 13. What is Brouter?
Hybrid devices that combine the features of both bridges and routers.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 14. What is cladding?
A layer of a glass surrounding the center fiber of glass inside a fiber-optic cable.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 15. What is point-to-point protocol?
A communications protocol used to connect computers to remote networking services including Internet service providers.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 16. How Gateway is different from Routers?
A gateway operates at the upper levels of the OSI model and translates information between two completely different network architectures or data formats.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 17. What is attenuation?
The degeneration of a signal over distance on a network cable is called attenuation.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 18. What is MAC address?
The address for a device as it is identified at the Media Access Control (MAC) layer in the network architecture. MAC address is usually stored in ROM on the network adapter card and is unique.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 19. Difference between bit rate and baud rate.
Bit rate is the number of bits transmitted during one second whereas baud rate
refers to the number of signal units per second that are required to represent those
bits.
baud rate = bit rate / N where N is no-of-bits represented by each signal shift.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 20. What is Bandwidth?
Every line has an upper limit and a lower limit on the frequency of signals it can carry. This limited range is called the bandwidth.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 21. What are the types of Transmission media?
Signals are usually transmitted over some transmission media that are broadly classified in to two categories.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 22. Guided Media:
These are those that provide a conduit from one device to another that include twisted-pair, coaxial cable and fiber-optic cable. A signal traveling along any of these media is directed and is contained by the physical limits of the medium. Twisted-pair and coaxial cable use metallic that accept and transport signals in the form of electrical current. Optical fiber is a glass or plastic cable that accepts and transports signals in the form of light.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 23. Unguided Media:
This is the wireless media that transport electromagnetic waves without using a physical conductor. Signals are broadcast either through air. This is done through radio communication, satellite communication and cellular telephony.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 24. What is Project 802?
It is a project started by IEEE to set standards to enable intercommunication
between equipment from a variety of manufacturers. It is a way for specifying
functions of the physical layer, the data link layer and to some extent the network
layer to allow for interconnectivity of major LAN protocols.
It consists of the following:
802.1 is an internetworking standard for compatibility of different LANs and MANs across protocols.
802.2 Logical link control (LLC) is the upper sublayer of the data link layer
which is non-architecture-specific, that is remains the same for all IEEE-
defined LANs.
Media access control (MAC) is the lower sublayer of the data link layer that
contains some distinct modules each carrying proprietary information specific
to the LAN product being used. The modules are Ethernet LAN (802.3), Token
ring LAN (802.4), Token bus LAN (802.5).
802.6 is distributed queue dual bus (DQDB) designed to be used in MANs.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 25. What is Protocol Data Unit?
The data unit in the LLC level is called the protocol data unit (PDU). The PDU contains of four fields a destination service access point (DSAP), a source service access point (SSAP), a control field and an information field. DSAP, SSAP are addresses used by the LLC to identify the protocol stacks on the receiving and sending machines that are generating and using the data. The control field specifies whether the PDU frame is a information frame (I - frame) or a supervisory frame (S - frame) or a unnumbered frame (U - frame).
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 26. What are the different type of networking / internetworking devices?
Repeater: Also called a regenerator, it is an electronic device that operates only at physical
layer. It receives the signal in the network before it becomes weak, regenerates the
original bit pattern and puts the refreshed copy back in to the link.
Bridges: These operate both in the physical and data link layers of LANs of same type. They
divide a larger network in to smaller segments. They contain logic that allow them to
keep the traffic for each segment separate and thus are repeaters that relay a frame
only the side of the segment containing the intended recipent and control congestion.
Routers: They relay packets among multiple interconnected networks (i.e. LANs of different
type). They operate in the physical, data link and network layers. They contain
software that enable them to determine which of the several possible paths is the
best for a particular transmission.
Gateways: They relay packets among networks that have different protocols (e.g. between a
LAN and a WAN). They accept a packet formatted for one protocol and convert it to a
packet formatted for another protocol before forwarding it. They operate in all seven
layers of the OSI model.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 27. What is ICMP?
ICMP is Internet Control Message Protocol, a network layer protocol of the TCP/IP suite used by hosts and gateways to send notification of datagram problems back to the sender. It uses the echo test / reply to test whether a destination is reachable and responding. It also handles both control and error messages.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 28. What are the data units at different layers of the TCP / IP protocol suite?
The data unit created at the application layer is called a message, at the transport layer the data unit created is called either a segment or an user datagram, at the network layer the data unit created is called the datagram, at the data link layer the datagram is encapsulated in to a frame and finally transmitted as signals along the transmission media.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 29. What is difference between ARP and RARP?
The address resolution protocol (ARP) is used to associate the 32 bit IP address with
the 48 bit physical address, used by a host or a router to find the physical address of
another host on its network by sending a ARP query packet that includes the IP
address of the receiver.
The reverse address resolution protocol (RARP) allows a host to discover its Internet address when it knows only its physical address.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 30. What is the minimum and maximum length of the header in the TCP segment and IP datagram?
The header should have a minimum length of 20 bytes and can have a maximum length of 60 bytes.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 31. What is the range of addresses in the classes of internet addresses?
Class A 0.0.0.0 - 127.255.255.255
Class B 128.0.0.0 - 191.255.255.255
Class C 192.0.0.0 - 223.255.255.255
Class D 224.0.0.0 - 239.255.255.255
Class E 240.0.0.0 - 247.255.255.255
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 32. What is the difference between TFTP and FTP application layer protocols?
The Trivial File Transfer Protocol (TFTP) allows a local host to obtain files from a remote host but does not provide reliability or security. It uses the fundamental packet delivery services offered by UDP.
The File Transfer Protocol (FTP) is the standard mechanism provided by TCP / IP for copying a file from one host to another. It uses the services offer by TCP and so is reliable and secure. It establishes two connections (virtual circuits) between the hosts, one for data transfer and another for control information.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 33. What are major types of networks and explain?
Server-based network
Peer-to-peer network
Peer-to-peer network, computers can act as both servers sharing resources and as clients using the resources. Server-based networks provide centralized control of network resources and rely on server computers to provide security and network administration
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 34. What are the important topologies for networks?
BUS topology: In this each computer is directly connected to primary network cable in a single line.
Advantages: Inexpensive, easy to install, simple to understand, easy to extend.
STAR topology: In this all computers are connected using a central hub.
Advantages: Can be inexpensive, easy to install and reconfigure and easy to trouble shoot physical problems.
RING topology: In this all computers are connected in loop.
Advantages: All computers have equal access to network media, installation can be simple, and
signal does not degrade as much as in other topologies because each computer
regenerates it.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 35. What is mesh network?
A network in which there are multiple network links between computers to provide multiple paths for data to travel.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 36. What is difference between baseband and broadband transmission?
In a baseband transmission, the entire bandwidth of the cable is consumed by a single signal. In broadband transmission, signals are sent on multiple frequencies, allowing multiple signals to be sent simultaneously.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 37. Explain 5-4-3 rule?
In a Ethernet network, between any two points on the network ,there can be no more than five network segments or four repeaters, and of those five segments only three of segments can be populated.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 38. What MAU?
In token Ring , hub is called Multistation Access Unit(MAU).
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 39. What is the difference between routable and non- routable protocols?
Routable protocols can work with a router and can be used to build large networks. Non-Routable protocols are designed to work on small, local networks and cannot be used with a router
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 40. Why should you care about the OSI Reference Model?
It provides a framework for discussing network operations and design.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 41. What is logical link control?
One of two sublayers of the data link layer of OSI reference model, as defined by the IEEE 802 standard. This sublayer is responsible for maintaining the link between computers when they are sending data across the physical network connection.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 42. What is virtual channel?
Virtual channel is normally a connection from one source to one destination, although multicast connections are also permitted. The other name for virtual channel is virtual circuit.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 43. What is virtual path?
Along any transmission path from a given source to a given destination, a group of virtual circuits can be grouped together into what is called path.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 44. What is packet filter?
Packet filter is a standard router equipped with some extra functionality. The extra functionality allows every incoming or outgoing packet to be inspected. Packets meeting some criterion are forwarded normally. Those that fail the test are dropped.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 45. What is traffic shaping?
One of the main causes of congestion is that traffic is often busy. If hosts could be made to transmit at a uniform rate, congestion would be less common. Another open loop method to help manage congestion is forcing the packet to be transmitted at a more predictable rate. This is called traffic shaping.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 46. What is multicast routing?
Sending a message to a group is called multicasting, and its routing algorithm is called multicast routing.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 47. What is region?
When hierarchical routing is used, the routers are divided into what we will call regions, with each router knowing all the details about how to route packets to destinations within its own region, but knowing nothing about the internal structure of other regions.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 48. What is silly window syndrome?
It is a problem that can ruin TCP performance. This problem occurs when data are passed to the sending TCP entity in large blocks, but an interactive application on the receiving side reads 1 byte at a time.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 49. What are Digrams and Trigrams?
The most common two letter combinations are called as digrams. e.g. th, in, er, re and an. The most common three letter combinations are called as trigrams. e.g. the, ing, and, and ion.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 50. Expand IDEA.
IDEA stands for International Data Encryption Algorithm.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 51. What is wide-mouth frog?
Wide-mouth frog is the simplest known key distribution center (KDC) authentication protocol.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 52. What is Mail Gateway?
It is a system that performs a protocol translation between different electronic mail delivery protocols.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 53. What is IGP (Interior Gateway Protocol)?
It is any routing protocol used within an autonomous system.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 54. What is EGP (Exterior Gateway Protocol)?
It is the protocol the routers in neighboring autonomous systems use to identify the set of networks that can be reached within or via each autonomous system.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 55. What is autonomous system?
It is a collection of routers under the control of a single administrative authority and that uses a common Interior Gateway Protocol.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 56. What is BGP (Border Gateway Protocol)?
It is a protocol used to advertise the set of networks that can be reached with in an autonomous system. BGP enables this information to be shared with the autonomous system. This is newer than EGP (Exterior Gateway Protocol).
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 57. What is Gateway-to-Gateway protocol?
It is a protocol formerly used to exchange routing information between Internet core
routers.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 58. What is NVT (Network Virtual Terminal)?
It is a set of rules defining a very simple virtual terminal interaction. The NVT is used
in the start of a Telnet session.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 59. What is a Multi-homed Host?
It is a host that has a multiple network interfaces and that requires multiple IP addresses is called as a Multi-homed Host.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 60. What is Kerberos?
It is an authentication service developed at the Massachusetts Institute of
Technology. Kerberos uses encryption to prevent intruders from discovering passwords and gaining unauthorized access to files.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 61. What is OSPF?
It is an Internet routing protocol that scales well, can route traffic along multiple
paths, and uses knowledge of an Internet's topology to make accurate routing decisions.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 62. What is Proxy ARP?
It is using a router to answer ARP requests. This will be done when the originating host believes that a destination is local, when in fact is lies beyond router.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 63. What is SLIP (Serial Line Interface Protocol)?
It is a very simple protocol used for transmission of IP datagrams across a serial line.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 64. What is RIP (Routing Information Protocol)?
It is a simple protocol used to exchange information between the routers.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Ques 65. What is source route?
It is a sequence of IP addresses identifying the route a datagram must follow. A
source route may optionally be included in an IP datagram header.
Save For Revision
Save For Revision
Bookmark this item, mark it difficult, or place it in a revision set.
Log in to save bookmarks, difficult questions, and revision sets.
Most helpful rated by users:
- What are the two types of transmission technology available?
- What is subnet?
- What are the possible ways of data exchange?
- What is SAP?
- What do you meant by "triple X" in Networks?
Related interview subjects
| PoowerPoint interview questions and answers - Total 50 questions |
| Data Structures interview questions and answers - Total 49 questions |
| Computer Networking interview questions and answers - Total 65 questions |
| Microsoft Excel interview questions and answers - Total 37 questions |
| Computer Basics interview questions and answers - Total 62 questions |
| Computer Science interview questions and answers - Total 50 questions |
| Operating System interview questions and answers - Total 22 questions |
| MS Word interview questions and answers - Total 50 questions |
| Tips and Tricks interview questions and answers - Total 30 questions |